1
Site check
We visit the site, take measurements, check sightlines and bylaw setbacks, and confirm what will actually work on your building.
Edmonton commercial signage partner
Commercial signs for Edmonton, designed, built, and installed by one team.
Crown designs, fabricates, and installs storefront, building, and pylon signs for businesses in Edmonton and across Alberta. One team manages the whole job, from first sketch and permits to final install and warranty.
Mr. Mikes Steakhouse Casual, Edmonton, illuminated storefront built & installed by Crown Signs
15+Years in business
1,000+Signs installed
95%Repeat & referral rate
Design
In-house fabrication
Permits & engineering
Install
Service & warranty
Design
In-house fabrication
Permits & engineering
Install
Service & warranty
Recent work across Edmonton.
Clinics, restaurants, retail, and multi-tenant sites across the Edmonton region, designed, built, and installed by Crown. Tap any sign to take a closer look.
Every sign a commercial space needs.
From a glowing channel-letter wordmark to a 20-foot pylon, designed, fabricated, and installed to match your building and pull in customers.
Channel Letter Signs
Dimensional lit letters: front-lit, halo-lit, or open-face. The signature storefront sign that makes your name read clearly day and night.
View channel letters
Pylon & Monument Signs
Freestanding roadside signs that pull traffic off the road and into your lot, from single-tenant monuments to tall multi-tenant pylons.
View pylon signs
Storefront & Fascia Signs
Building fascia, blade signs, and window graphics that finish your exterior cleanly and make the unit unmistakably yours.
View storefront signs
Business Signs
The full exterior package: building signs, illuminated cabinets, and brand signage that make a business look established and professional.
View business signs
Custom & Interior Signs
LED cabinets, reception logos, dimensional letters, directories, and wayfinding, custom-built to match your brand inside and out.
View custom signs
Sign Repair & Service
Re-lamping, LED retrofits, face and tenant-panel replacement, and electrical repair, on the Edmonton area's signs, whether or not we built them.
View sign repairOne team. The whole job, handled in-house.
You hire one company for the entire commercial signage job, not a separate designer, permit runner, fabricator, and installer who point at each other when something slips. Here's what Crown carries for you.
- Site check & measurementsWe measure on site, check sightlines, and confirm what will actually work on your building.
- Design & renderingsWe render the sign to match your brand and the building, so you approve it before we build.
- Permits & landlord approvalsWe prepare the drawings and pull the development (sign) and electrical permits, plus landlord sign-off.
- In-house fabricationYour sign is built in our Edmonton shop, aluminum formed and welded, not assembled from a kit.
- LED & electricalLow-draw LED and wiring to the Canadian Electrical Code, cUL / CSA listed.
- InstallOur crew installs clean and on schedule, then passes the City electrical inspection.
- Warranty & serviceBacked by a 5-year warranty, and we service signs after, even ones we didn't build.
From site check to warranty, managed by us.
You talk to the people who measure, design, permit, build, and install your sign, never a call center, never a chain of subcontractors pointing at each other.
2
Design & quote
We render the sign to match the building and your brand, then quote real options and pricing after a free site survey.
3
Permits & production
We prepare P.Eng-stamped drawings and pull the development (sign) and electrical permits, plus landlord approvals.
4
Fabrication & install
Your sign is built in our Edmonton shop (aluminum formed and welded, LED wired to code), then our crew installs it clean and on schedule.
5
Warranty & support
We pass the electrical inspection, back the sign with a 5-year warranty, and service it after, even signs we didn't build.
A channel letter, layer by layer.
Every Crown letter is five real components, formed and assembled by hand in our Edmonton shop. Watch one come apart, then power on.
01
Acrylic faceUV-stable, so the colour holds through Alberta sun and winter.
02
Trim capRetains the face and gives the letter its crisp edge.
03
LED modulesLow-draw, sealed modules, wired to the Canadian Electrical Code.
04
Aluminum returnFormed and welded in-house, not bent from a kit.
05
RacewayHouses the power supply and mounts clean to the wall.
· Selected clients
Start your project
Send photos of your storefront or sign area. We'll tell you what's possible.
A few photos and a couple of details are all we need to come back with real options and pricing after a free site survey. No call center, no obligation, no spam.
Before you ask.
It depends on the type, size, illumination, and install. Storefront channel-letter signs usually land between $3,000 and $9,000 installed; pylon and monument signs run higher. Send us the project details above and we'll come back with a real number after a free site survey, not a guess.
Most projects run 3–6 weeks from approved design to installation, depending on permit timelines and fabrication complexity. We'll give you a realistic schedule up front and keep you posted at each step.
Yes. Crown is based in Edmonton and serves commercial signage projects across Alberta. Send your location and a few project details, and we'll confirm the best next step.
Yes, and in Edmonton that's usually two permits, not one: a development (sign) permit through the City's Zoning Bylaw, plus a separate electrical permit for any illuminated sign. We prepare the stamped drawings, pull both permits, manage landlord and development approvals, and our installs are done by a certified sign technician so the electrical inspection passes clean.
Yes. Every electrified Crown sign carries a cUL/CSA listing and is wired to the Canadian Electrical Code, exactly what a City electrical inspector and your landlord look for. Structural and footing drawings are P.Eng-stamped where required.
We do. We re-lamp, retrofit old fluorescent or neon cabinets to LED, replace faces and tenant panels, and repair transformers and wiring across the Edmonton area, whether or not we built the sign originally.
Ready when you are
Get your free sign consultation.
Tell us about your storefront and we'll bring real options, a site survey, and an honest quote. No pressure, no obligation.